5Tons -6Tons ISUZU ELF High Water Pressure Cleaner Trucks Euro 5 190HP Engine

The function of the cleaning and suction vehicle:

It is a new type of environmental sanitation vehicle that collects, transfers, and cleans up and transports sludge and sewage to avoid secondary pollution. The suction vehicle can self suction and discharge, with fast working speed, large capacity, and convenient transportation. It is suitable for collecting and transporting liquid substances such as feces, mud, crude oil, etc

The suction truck adopts a domestically advanced vacuum pump with high suction force and long suction distance, making it particularly suitable for suction, loading, and unloading of sediment in sewers, especially for large objects such as sewage mud, silt, stones, bricks, etc. There are two types of emissions: pressurized emissions and self flowing emissions. The suction truck has the characteristics of high suction efficiency, self suction, self discharge, and direct irrigation, and is fast and easy to operate. Suitable for use by municipal departments of environmental sanitation in large, medium, and small towns.

Special parts for suction trucks:

It is composed of a power take-off, transmission shaft, vacuum suction pump, pressure tank, hydraulic part, pipe network system, vacuum pressure gauge, fecal inspection window, hand washing device, etc. It is equipped with a high-power vacuum suction pump and a high-quality hydraulic system. The tank head is one-time die-casting formed, and the tank body can be opened back and double top self unloading. The dirt inside the tank can be directly dumped through the back cover, which has the characteristics of high vacuum (greater suction than a suction truck), large tonnage, high efficiency, and wider use. 

The composition of the suction vehicle:

Oil water separator, water gas separator, special vacuum suction pump, volume pressure gauge, pipe network system, suction pipe, gravity valve vacuum tank, Communicating vessels (fecal window), full-automatic anti overflow valve, hydraulic kit. 

Working principle of cleaning and suction:

Due to the continuous immersion of the fecal suction hose on the liquid surface, the air inside the fecal tank becomes thinner and thinner due to its lack of replenishment, resulting in a pressure lower than atmospheric pressure. The fecal liquid is then used under atmospheric pressure. Alternatively, due to the proximity of the siphon to the bottom of the tank, when air is continuously discharged into the fecal tank, it is compressed due to its lack of outlet, resulting in a pressure inside the tank that is higher than atmospheric pressure. Under the action of compressed air, the fecal liquid is discharged out of the tank through the siphon and the suction hose. 

The cleaning and suction vehicle has the characteristics of high suction efficiency, self suction, self discharge, and direct irrigation. Filling time of the fecal tank:<5min, suction lift:>8m. It has the characteristics of long service life, fast working speed, easy operation, and convenient transportation. 

Our high-pressure cleaning vehicle products use high-quality and efficient high-pressure water pumps, which have high outlet pressure, reliable performance, long service life, water-saving, and good cleaning effects. The high-pressure nozzle of the pipeline dredging vehicle has no scattering, small pressure loss, no rust on the nozzle, long service life, and fully utilizes the kinetic energy of high-pressure water flow to clean in a high pressure and low flow manner. Hydraulic components, with stable and reliable performance, use a sandwich power take-off for full power output, avoiding the loud noise caused by other similar products using the upper cover for power extraction, and the gears are prone to damage

Composition of high-pressure cleaning vehicle (pipeline dredging vehicle):

Waterway system: including water tank, high-pressure water pump, inlet pipe, discharge stop valve, water filter, water level gauge, inlet stop valve, water pressure gauge, pressure gauge switch, high-pressure nozzle, high-pressure three-way valve, and drum.

Hydraulic system: including oil level gauge, oil tank, filter, gate valve, oil pump, overflow valve, throttle valve, oil pressure gauge, one-way valve, oil motor, directional valve, one-way valve, and switch.